This can also be used to replace the original 115v pump on older spas. Just move a white wire from one spot on the pc board to another (See Installation Information below)

SKU: 01512-321
Manufacturer: Dimension One Spas®

Features: 240V, E10 Laing Circ Pump without Flow Switch.

• Use in conjunction with 01710-131 flow switch or 01710-130 flow switch assembly.

Technical and Installation:

• Flow Switch Assembly Installation 2009-2014
• Installing a New E10 Series Circulation Pump
• Purge Air from Circulation Pump

Installation Information:

***If needed – To convert your circuit board to run the new circulation pump at 240V (if the old pump was 120V) you will need to move the white component wire for the circulation pump to a 240V component bank on the circuit board

If your board looks like this, follow these instructions: 

• Convert Circulation Pump Voltage on PC Board

_________________________________________________________

Trust the experts for top-quality spa parts at unbeatable prices!