Using Plastic Welder Without a Mixing Nozzle

Preparing to Use the 2-Part Epoxy Kit without a Mixing Nozzle

Requires:

  • Epoxy
  • Barrel
  • Plunger
  • Caulking gun (not pictured)

Plastic Welder 2-Part Epoxy begins to set up in 1-3 minutes.

Be sure your project is ready before opening the epoxy tube.

Step 1:

Twist and remove epoxy tip.

Step 2:

Insert epoxy tube into barrel.

Step 3:

Insert epoxy, plunger, and barrel into caulking gun.

Applying Epoxy without Mixing Nozzle

Step 1:

Wearing rubber gloves, squirt some epoxy onto a paper plate.

Step 2:

Use a plastic knife to mix the epoxy until it is one color

Step 3:

Use the knife to carefully apply the epoxy onto the desired location.

Step 4:

Use a rag to wipe the excess epoxy from tip of tube.

Step 5:

Apply another layer of epoxy on the material.