Hot Tub Summer Mode Temperature

Set Temperature above 60 degrees.1. Filtration pump comes on as programmed

2. After 1 hour of filtration, if temp is 2 degrees over Set Temp, filtration cycle stops.

3. Filtration cycle resumes when temp is 1 degree of Set Temp.

4. Circulation pump always on

• Until water temp exceeds set temp by 2 degrees.
• Circ pump operation adds heat just by running so this stops the input of additional heat.
• At 1 degree below set point, circ pump turns back on.

Set temperature to 59 degrees. Press “Down” button once more; Summer Mode begins.1. Filtration pump comes on as programmed

2. After 1 hour of filtration, if temp is 2 degrees over Set Temp, filtration cycle stops.

3. Filtration cycle resumes when temp is 1 degree above Set Temp.

4. Circulation pump on until water temp reaches 107

• Until water temp exceeds set temp by 2 degrees.
• Circ pump operation adds heat just by running so this stops the input of additional heat.
• Circ pump turns off until temp drops to 102
  -Then circ pump turns back on.