Replacing Hot Tub Cover Safety Clip

Replacing a Safety Clip on the Spa Cover Strap

If the male portion of the safety clip needs replacing, here are some easy steps to get it done.

Step 1:

Use heavy duty wire cutters to cut an opening on the male side of the safety clip. Use the same cutters to remove the old clip if necessary. Be careful not to cut the vinyl strap!

Step 2:

The opening should be about 1/4″ wide.

Step 3:

The 1/4″ opening is just wide enough to get the strap on. Be creative and fold the strap to get it to slide on. Be patient, it takes a little practice to figure it out.

Step 4:

Success!

These instructions are for informational purposes only. Easy Spa Parts does not guarantee that following these instructions will resolve your specifi c spa condition, nor does Easy Spa Parts accept liability for work performed by anyone attempting the repair or part replacement. These instructions are provided solely by Easy Spa Parts. Certain parts mentioned in the instructions are manufactured by third parties, including Dimension One Spas. Dimension One Spas has not supplied or reviewed these instructions. Dimension One Spas shall have no liability to you relating in any manner to these instructions or any acts or omissions by Easy Spa Parts.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW: 1) EASY SPA PARTS AND DIMENSION ONE SPAS EXCLUDE ALL IMPLIED WARRANTIES THAT MAY ARISE IN CONNECTION WITH THE INSTRUCTIONS, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE; 2) NEITHER EASY SPA PARTS NOR DIMENSION ONE SPAS SHALL BE LIABLE UNDER ANY LEGAL OR EQUITABLE THEORY, WHETHER IN CONTRACT, TORT OR OTHERWISE (INCLUDING NEGLIGENCE AND STRICT LIABILITY) FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES WHATSOEVER , ARISING FROM YOUR USE OF THE INSTRUCTIONS OR FROM ANY MATERIAL CONTAINED IN, OR OMITTED FROM, THE INSTRUCTIONS