Dimension One

Customer Support
(866) 418-1840
techhelp@easyspaparts.com

Monday-Friday

8:30 am - 4:00 pm West Coast Time

A hot tub is a wonderful place to unwind, but sometimes, issues like air locks can disrupt your relaxation. In this guide, we’ll explore the symptoms of a hot tub air lock and provide solutions to fix it, ensuring your hot tub functions smoothly for a soothing experience every time.

Symptoms of Hot Tub Air Lock:

1. No Water Flow: One of the most  noticeable signs of an air lock is a lack of water flow from the jets or a weak flow compared to usual.
2. Air Bubbles in Jets: If you see excessive air bubbles coming from the jets, it’s likely due to air trapped in the plumbing lines.
3. Pump Struggling to Prime: Your hot tub’s pump may struggle to prime or may make unusual noises when air is trapped in the system.
4. Reduced Heating Efficiency: Air  locks can interfere with the circulation of water, leading to reduced heating efficiency and uneven temperature distribution in the hot tub.

How to Fix Hot Tub Air Lock:

1. Turn Off Power: Before starting any troubleshooting, turn off the power to your hot tub at the breaker panel to ensure safety.
2. Release Air from Jets: Start by releasing air from the jets. Turn on the pump and let it run for a few minutes. Then, open each jet one by one to release trapped air until water flows smoothly.
3. Check Water Level: Ensure that the water level in your hot tub is sufficient. Low water levels can contribute to air locks.
4. Bleed Valves: Some hot tubs have bleed valves specifically designed to release air from the plumbing system. Locate these valves and use them to remove air.
5. Use a Wet/Dry Vacuum: If air lock persists you can use a wet/dry vacuum to suck air out of the jets. Attach the vacuum to the jet openings and run it for a few minutes to remove trapped air.
6. Check for Leaks: Inspect your hot tub  for any leaks in the plumbing that could be causing air to enter the system. Repair any leaks found to prevent future air locks.
7. Prime the Pump: After addressing the air lock, prime the pump by filling the hot tub with water and ensuring proper circulation before turning on the heater.

Dealing with a hot tub air lock can be frustrating, but by identifying the symptoms and following these steps to fix it, you can restore proper water flow and enjoy a relaxing soak in your hot tub. Regular maintenance and checks can help prevent air locks and other issues, ensuring your hot tub functions smoothly for years to come.

kocaeli web tasarım ajansı istanbul web tasarım ajansı ankara web tasarım ajansı izmit web tasarım ajansı gebze web tasarım ajansı izmir web tasarım ajansı kıbrıs web tasarım ajansı profesyonel logo tasarımı